Tianjin Jinnan Drying Apparatus Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Xing Jirong
  • Company Name : Tianjin Jinnan Drying Apparatus Co., Ltd.
  • Tel : 86-22-28581128,13920275028
  • Fax : 86-22-28581128
  • Address : Tianjin,Tianjin,Taoyuangu Village, Shuanggang Town, Jinnan District
  • Country/Region : China

JGR Series high-speed centrifugal spray drier

JGR Series high-speed centrifugal spray drier
Product Detailed

Detailed Product Description


JGR Series high-speed centrifugal spray drier

 Working principle:

After fresh air is filter and heated, it enters into the hot air distributor which on the top of the drying room. The hot air in spiral form equably enters into the drying room, when the liquid raw material are passed through the centrifugal sprayer on the top of the drying room, it will be sprayed into the extreme slim mist liquid beads,   which made the liquid material have enlarged contact area with hot air, then water evaporates quickly.  Completing the drying needs only few seconds.

Advantages:

1.Drying speed is very rapid. After liquid material is atomized, the surface of the material will be enlarged greatly. On a high temperature condition, 95%-98% of water can be evaporated instantly .it will take you several seconds to finish drying.

2Adopting parallel flow drying form, which make the hot air and the liquid flow at the same direction, through the temperature of hot air is quite high, when the hot air enters into the drying room and contact with liquid beads, temperature of the room go down suddenly, which wont make the dry materials be overheated, so it is also suitable for heat sensitive material.

3. it widely used in many fields. According to the characteristics of raw material, it can apply hot air or cooling air to dry and granulate. Many different products can use this machine..

4. Because the drying is finished in a short time, so the finished products can largely keep the same form.

5. Process of production is simple, it is easy to operate. , and dry it to powder once, .for most products, after drying, there is no need to smash and sieve. So, it greatly reduces the procedure and simplifies the production flow chart. To some extent, the equipment is easy to operate, adjust, control and maintain the diameter of granule, bulk density, and moisture.

6. In order to make the material non-polluted and extend the use-life, the equipment which contacted with material, we adopt stainless steel .All the controlling systems are all-in-one operated, that is, for all parts in the switch broad, we have installed indicating device and start and stop device



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.